Neon orange
NEW colours! 3 STEP CrystaLac NEON colours
Neon 3 STEP shades – because there is no summer without them.
These vibrant colours will make you stand out this summer! Bright, energetic shades that will immediately catch the eye. Perfect if you want fresh, trendy and really striking nails for the summer season. This is not about being understated, but about a bold, energetic summer vibe.
Due to different monitor settings, the colour you see on your screen and the actual colour may differ!
When applying neon colours or covering them with gel polish, use a weaker lamp or the lamp's halving program (Low Heat mode), this can reduce the occurrence of gel polish containing neon pigments temporarily becoming darker in tone or changing the original shade due to higher UV exposure.
This phenomenon can also be avoided by using Clear 0/Top CrystaLac, which needs to be fixed, and among the non-fixing topcoats, we recommend Cool Top Gel Universal New Formula, Sens Top Gel, or Hema Free Top Gel. (We do not recommend using Cool Top 4 Dark , Cool Top Gel Original topcoats for neon colours).
Cure in UV lamp for 2-3 minutes, in LED lamp for 1-2 minutes (depending on lamp strength)
A common characteristic of neon pigments is that they can lose their intensity and fade when exposed to UV light/sunlight. Despite this, we still love them ❣️
We use it on natural nails.
The base gel for the material is Elasty Hardener Gel , Compact Base Gel, Compact Base Gel Pro, Base Gel, or Builder Base Gel.
The durability of 3 STEP CrystaLacs is 3 weeks.
Dissolution takes a maximum of 10 minutes (depending on the thickness of the material and the solvent).
CN Tip: In case of thin nails, strengthen the nail plate with Elasty Hardener Gel, Compact Base Gel or Hardener Sand.
Attention!
Neon colours are particularly sensitive to light due to their special pigment content. The curing process can be triggered not only by UV/LED lamps, but also by strong table or natural light.
As a result, the material may begin to thicken slightly at the mouth of the bottle or on the cap brush. If this part is returned to the bottle, it may affect the consistency of the product.
To avoid this problem, we recommend that you:
During use, keep the bottle open only for as long as necessary;
Be especially careful not to mix any material that may have set at the mouth of the bottle back into the product, and wipe the neck of the brush and the mouth of the bottle after use so that small, set pieces of material do not get back into the product;
Remove the hardened parts from the brush if necessary;
Store the product away from direct light.
By following these simple steps, the quality and usability of the product can be maintained in the long term.
Thank you for your cooperation!
